BarkerCustom terms
Version BC-2026-11-17-2 · Last updated November 17, 2026
These terms cover the cabinets and other products you buy from BarkerCustom, the limited warranty on those products, and your use of the BarkerCustom website, cabinet designer and PRO membership. Please read them before you place an order or start a membership. The version you agree to at checkout governs that order.
BarkerCustom is a business name of Barker Cabinets Inc., 19355 SW 125th Ct, Tualatin, OR 97062. Orders, order changes and warranty claims: info@barkercustom.com. Customer support is provided in writing by email; phone support is not available. You can ask for a free printed copy of these terms and the limited warranty by email or by mail at the address above.
Contents
- Part 1 · Terms of sale
- 1 Scope and your order agreement
- 2 Custom products and assembly requirements
- 3 Measurements and design responsibility
- 4 Samples, renderings and visual representations
- 5 Wood color, grain and aging
- 6 Construction and finish characteristics
- 7 Order placement, payment and acceptance
- 8 Changes to your order
- 9 Returns of conforming products
- 10 Production estimates, backorders and delays
- 11 Product availability and substitutions
- 12 Shipping, delivery and special access
- 13 Receipt, inspection and shipping damage
- 14 Shortages, errors and claims
- 15 Limited warranty and remedies
- 16 Liability limits and rights preserved
- 17 Disputes and governing law
- 18 Electronic records and general provisions
- Part 2 · Limited warranty
- W1 Who and what is covered
- W2 Our repair, remake and replacement remedy
- W3 Cosmetic surface grades and exact thresholds
- W4 Natural material and finish exclusions
- W5 Laminate, acrylic and other non-wood fronts
- W6 Size, warping and minor on-site adjustment
- W7 Excluded causes and uses
- W8 Evidence, inspection, approval and denial
- W9 Claim freight, labor and liability limits
- W10 Goodwill and rights that remain available
- Part 3 · Website, accounts and PRO membership
Part 1 · Terms of sale
1 Scope and your order agreement
These Terms of Sale apply to physical products purchased through the BarkerCustom website and cabinet designer from Barker Cabinets Inc. (“BarkerCustom,” “we,” or “us”). “You” means the purchaser. If you order for a business or another person, you represent that you are authorized to approve the order and incur its charges for that purchaser.
Your agreement consists of these Terms, the Limited Warranty supplied for your products, the product specifications and appearance standards displayed for your selected items before purchase, your final order summary, and any written revision accepted by you and us. We provide access to these documents before you place your order. Save or print them with your confirmation.
An expressly accepted written order revision controls the specific specification or commercial detail it changes. The Limited Warranty controls the scope of its voluntary warranty coverage. No general website disclaimer eliminates an express promise made in your accepted order or a right that cannot legally be limited. If you notice conflicting information, ask us to resolve it before you approve production. We will not rely on this request to excuse our own inaccurate material representations.
The version accepted for your order governs that order. Later website changes do not retroactively reduce your rights. Purchases made through a legacy Barker brand remain governed by the agreement applicable to that purchase unless you and the responsible seller lawfully agree otherwise.
2 Custom products and assembly requirements
Our products are manufactured to the dimensions, materials, finish, options, and quantities in the accepted order. Custom products generally cannot be restocked or resold for another project. Review your entire order carefully before submitting it.
Cabinet cases ship flat-packed as ready-to-assemble components. They do not arrive as assembled cabinet cases. You or your installer must assemble, position, level, secure, and install the cabinet cases. Drawer boxes ship assembled. Assembled drawer boxes still require installation and may require attachment or adjustment of slides, drawer fronts, or other hardware as specified for the selected product. Replacement service may involve replacing an individual part or hardware component rather than an entire assembled unit.
Cabinet installation, field finishing, plumbing, electrical work, countertop work, appliance installation, and site modification are not included unless expressly listed in an accepted written service agreement. Use competent installers and suitable tools. Follow the installation instructions and applicable building requirements, including securing cabinets to an appropriate structure. Do not rely on a cabinet rendering as an installation or structural engineering plan.
Cabinet construction, exposed interior treatment, backing, hardware, and supplied components depend on the selected product. Ordinary cabinet sides may show construction holes or interior material. Where specified, a separately ordered finished end panel is needed on each exposed side. Decorative knobs/pulls and their drilling, wall-mounting fasteners, fillers, toe skins, moldings, finished ends, and other accessories are included only where the selected product description or final order expressly includes them. Cabinet assembly screws supplied with a case are not a substitute for installation fasteners appropriate to the building.
3 Measurements and design responsibility
You are responsible for accurate project measurements and for approving the final sizes, quantities, door and drawer orientation, hinge and slide selections, drilling, reveals, clearances, fillers, finished surfaces, appliance openings, and other options. Verify dimensions against the actual site and the current appliance or hardware installation specifications. Account for wall irregularities, obstructions, service connections, floor conditions, door swings, and access needed for assembly and delivery.
Planning tools, renderings, sample layouts, calculators, and general advice help you prepare an order. They do not replace field measurement or a qualified installer’s assessment. Images may omit fasteners, fillers, clearances, finished panels, hardware, or installation conditions. Only the products and specifications in the accepted order are supplied. This allocation does not excuse a product that fails to meet the specifications we accepted or a separately purchased design service we expressly agreed to perform.
Do not assume that a cabinet’s named size is the finished size of every component or opening. Cabinet-case machining and alignment tolerances are plus or minus 1/8 inch; CNC-drilled case-hole placement may vary by up to 1/4 inch. These case tolerances do not authorize supplying the wrong ordered cabinet size or a case that cannot be safely assembled and used as specified. Minor fit adjustments may be required as described in the Limited Warranty. The finished dimensions and permitted manufacturing tolerances for doors, drawer fronts, and other components are those expressly stated in the accepted product specification. Do not apply case-hole tolerances to door sizes, visible cosmetic marks, or hardware compatibility. The accepted specification must identify the dimensions and convention for each other product.
For a size claim, provide clear photographs showing both measurement endpoints on an accurate rule or tape. Avoid an unreliable tape hook: where practical, start at the one-inch mark and subtract one inch from the reading. Measure the part in the condition and manner specified for that product. We may request additional measurements or an authorized physical inspection if the images do not establish its size. We will assess the evidence against the accepted specifications and applicable tolerances.
Customer selection, field-measurement, drilling, finishing, assembly, and installation errors are not manufacturing defects. Replacement items needed solely because of those errors must be ordered and paid for. Contact us before attempting a correction that could damage a part or affect a claim.
4 Samples, renderings and visual representations
We strongly recommend ordering representative samples before placing your main order. Samples help show the material, construction, finish, texture, and edge treatment. One sample cannot display the full range of natural variation or every characteristic of a finished project. Screens, photographs, lighting, and renderings can change the appearance of color, sheen, texture, and scale.
A sample is representative rather than a promise that every piece will be identical. Products must nevertheless conform to their stated material, finish, and other express specifications, subject to the disclosed characteristics and tolerances. Samples and separately placed orders may come from different material or finish batches.
Where samples are offered, sample purchases do not create a credit against later purchases. Conforming samples are not returnable for preference changes. Rights concerning defective, wrong, or nonconforming samples remain available under the applicable warranty and law.
5 Wood color, grain and aging
Real wood and wood veneer vary naturally. Boards and veneers of the same species can differ in color, grain pattern and direction, mineral streaks, figure, knots permitted by the selected grade, pore structure, and response to finishing. Solid wood frames, veneered center panels, moldings, case veneers, and edge banding can differ even within one cabinet or order. Paint, stain, and clear finish do not eliminate every natural feature.
BarkerCustom does not provide door-to-door grain matching. This includes slab plywood doors. Grain and color tone are not arranged to run continuously between doors, between a door and drawer front, between fronts on the same cabinet, or across adjacent cabinets, panels, and moldings. We do not offer sequence-matched or continuous-grain layouts. A selected grain orientation, such as vertical grain, describes direction only; it does not create a grain-matching service or promise.
Differences in grain and natural color tone consistent with the selected material and disclosed grade are expected product characteristics and are not grounds for a preference return or a cosmetic warranty remake. This does not excuse the wrong species, wrong selected finish, or a genuine covered manufacturing defect.
Wood and finishes change with age, air, light, humidity, and use. Cherry, walnut, sapele, and other woods can change noticeably. Different pieces may change at different rates and may never become identical. New or replacement products may differ from older products, samples, or earlier orders. We do not guarantee that these differences will disappear over time, and we do not provide custom matching to an existing or aged finish.
Finish formulations, suppliers, and available product lines may change for future production. We do not guarantee an exact color, grain, or sheen match between separately placed orders or between a replacement and aged installed material. A change that materially departs from an already accepted specification will be handled under the order-change and substitution provisions rather than imposed under this natural-variation disclosure.
6 Construction and finish characteristics
Wood moves as environmental conditions change. Normal movement can make joints and seams more visible, especially on painted five-piece doors. Slight lines at frame joints and frame-panel transitions, end-grain texture, and normal differences between veneer and solid wood are expected. Ordinary appearance changes that do not result from a covered defect are excluded from cosmetic warranty service. An actual failed joint or structural defect is not automatically excluded merely because it occurs at a seam.
Raised-panel centers may be assembled from multiple glued wood strips rather than one wide board. Normal glue-up grain transitions, structural pin marks on the back, identifying job-number engravings, and spray-hanger holes on the top, bottom, side edges, or back are expected manufacturing features. These hanger holes are not normally touched up. Panel movement and minor field adjustment may occur. Obtain instructions before forcing or modifying a panel.
Slab plywood doors have real-wood veneer over a plywood core with banded edges. The edge seam, wood grain, and the normal transition between face veneer and banding may remain visible through paint or stain. A painted slab plywood door is not represented as a seamless, grainless surface. Order a finished sample if the edge treatment or grain appearance is important to your project. Slab plywood doors are not grain matched to adjacent doors or fronts.
Laminates, acrylic surfaces, and edge banding can differ in sheen, texture, pattern repetition, and color. A product’s back may use a different balancing surface than its face. Normal banding seams and disclosed slight surface marks are addressed in the product’s appearance standard. They do not excuse dangerous edges, structural defects, or nonconformity with the accepted material specification. Keep protective film in place during installation where the manufacturer’s instructions call for it, and follow those instructions for removal and cleaning.
The complete material and surface-specific cosmetic thresholds, exclusions, oversized-product limits, and remake rules appear in the Limited Warranty, sections W3 through W6. Those standards are part of the product appearance bargain and should be reviewed before ordering.
Raw and primer-only products require appropriate preparation and final finishing by the customer. Primer is not a final finish. Normal filling, sanding, smoothing of grain or primer buildup, and compatible finish application may be required. This preparation obligation does not eliminate coverage for a genuine structural or other covered manufacturing defect. Inspect before finishing; report suspected defects before altering the affected area.
Use products only in the interior environment for which they are specified. Protect them from prolonged water, condensation, steam, extreme heat/cold, and extreme humidity. Wipe spills promptly and follow care instructions. Smoke, airborne cooking residue, cleaners, moisture, and light can affect appearance. Damage actually caused by misuse or unsuitable environmental conditions is excluded as stated in the Limited Warranty.
7 Order placement, payment and acceptance
Before you submit an order, review the itemized product configuration, price, discounts, taxes, shipping charge, delivery service/address, and applicable estimated shipment timing. You authorize the payment method and amount shown at checkout. You represent that you may lawfully use that payment method.
Where checkout requires payment before submission, orders totaling $5,000 or less require full payment by card or a supported wallet. Orders over $5,000 require the deposit amount displayed at checkout by card or a supported wallet before submission, with any remaining balance payable through a linked bank account. The displayed deposit may be a fixed dollar amount or a percentage of the final order total, including confirmed shipping and discounts, and never exceeds that total. The exact deposit and remaining balance are shown for your agreement before payment. If the deposit covers the full order total, no further balance is due. The deposit is applied to the order total. Your order is submitted only after the required initial payment succeeds; production remains on hold until full payment clears. For new orders using the non-refundable-deposit payment policy displayed at checkout, the displayed deposit is non-refundable from the time payment succeeds, except where required by law or if we cannot fulfill your order. The remaining balance must be paid through Stripe by linked bank account before production. You must separately acknowledge this deposit and funding policy before continuing to payment. A staff-approved or legally required refund does not permit further payments on the cancelled order. Existing orders retain the deposit-refund policy and any refund window accepted with those orders. These deposit terms apply only when shown and accepted at checkout; prior orders retain their accepted terms. For other payment flows, the timing shown at checkout applies. This payment timing is not a shipment estimate. An automated receipt acknowledges submission; our production confirmation or release of the accepted order to production confirms acceptance. We may review an order for availability, manufacturability, pricing errors, fraud, and payment verification before acceptance. If we cannot accept it as submitted, we will notify you and either request your agreement to a revised order or cancel and refund the unaccepted portion as required. We will not charge a higher corrected price or materially change the selected products without your agreement.
Taxes are charged as applicable to the transaction. Prices and promotions may change for future orders. Discounts and shipping offers apply only under the offer displayed for the accepted order and ordinarily apply per order; separate orders cannot be combined after submission unless we expressly agree. No additional trade, retroactive, or combined-order discount is implied.
Where a payment fails or an order requires clarification, we may pause processing and contact you. Any revised shipment estimate, payment request, or cancellation will be handled consistently with the accepted order and applicable law. The production lead time disclosed at checkout starts only after the full order payment succeeds. A deposit, bank verification, or pending bank processing does not start that production estimate. This agreed production estimate does not postpone any shipment deadline, delay notice, cancellation right, or refund obligation that applicable law has already established.
8 Changes to your order
Your products are made to order, so review your whole order carefully before you submit it. After you submit an order we may not be able to change or cancel it.
If you need a change or a cancellation, email info@barkercustom.com as soon as possible with your order number and the specific change you need. A request is not confirmation. We will tell you whether the change or cancellation is still possible and, before you accept it, its effect on price and timing. An accepted change is documented in a revised order confirmation showing the changed specifications, price and estimated shipment timing. Keep the revised confirmation. We are responsible for manufacturing to the revision we actually accepted.
Additions, size changes, substitutions you request, and combining separate orders are available only if we agree in writing. A paid, submitted design is locked: a new editable copy of it is a separate design and does not change the submitted order, and edits to a saved design do not modify an accepted production order.
These limits concern voluntary changes to conforming custom orders. They do not remove any right to cancel or receive a refund because of a legally covered shipment delay, our failure to supply the agreed goods, a remedy required by law, or an express right in the Limited Warranty. We will not deduct an administrative, production, transaction, or restocking fee from a refund where the law requires a full refund.
9 Returns of conforming products
Custom-sized or custom-configured cabinets, doors, drawer fronts, drawer boxes, rollouts, panels, moldings, and other made-to-order products are final sale for change of mind, preference, or customer ordering error. We do not accept preference returns merely because a correctly supplied product is not what you intended or because its disclosed natural variation differs from a rendering or sample.
This final-sale policy does not govern wrong goods, covered damage, covered defects, or other legally required remedies. Report those under the claims procedure rather than returning goods without instructions.
Hardware is also final sale. We do not offer voluntary returns, exchanges, or store credit for unused, unopened, surplus, incorrectly selected, or unwanted hinges, slides, pulls, accessories, or other hardware, whether purchased alone or with custom products. There is no unused-hardware return window or restocking-fee return option, and sending hardware back does not create a right to a refund.
Do not send products back without written return instructions. A return authorized for inspection or a required remedy is not a voluntary-return program. Pack authorized returns securely and use the stated shipping method. We do not charge a restocking fee for a covered defect, seller error, or another return for which such a fee is prohibited. An unauthorized shipment does not cancel the order or require us to issue a discretionary credit; we will communicate reasonable disposition instructions without overriding any lawful return or refund right.
10 Production estimates, backorders and delays
Custom manufacturing time and carrier transit time are separate. Estimated production is 6–8 weeks for raw wood doors; allow approximately one additional week for painted or stained doors. Production lead time starts only after full order payment succeeds, not at the deposit, bank verification, or pending bank processing stage. Allow approximately one additional week for shipping and transit when reading a displayed delivery estimate. These are estimates, not guaranteed dates. SLIM Shaker is in beta; production refinements may delay shipment, so customers should allow schedule flexibility. The estimated shipment date or range applicable to your order is shown before purchase and recorded in your order confirmation. Production estimates may vary with the selected finish, products, workload, holidays, material availability, and quality checks. We maintain a reasonable basis for the shipment estimates we provide.
Do not schedule demolition, countertop templating, or installation solely from an estimated date. Allow time to receive and inspect all required components and to resolve any shortage or damage before committing tradespeople to work. An estimated arrival date is not a promise to pay a contractor’s standby costs; any liability limitation remains subject to applicable law.
If we cannot ship within the applicable promised or legally required period, we will provide the required delay notice, revised estimate where available, and your options to consent or cancel for a prompt refund. We will obtain affirmative consent when required. An unanswered general status email is not automatically consent to every further delay.
We may ship an order in separately identified portions, including cases, assembled drawer boxes, fronts, millwork, hardware, and backordered items. Partial shipment does not mean that unshipped goods have been delivered or remove your applicable rights concerning those goods. We will identify outstanding items and communicate their status. Quality-control remakes may ship separately.
11 Product availability and substitutions
Material sources and hardware availability may change. Product specifications identify the selected material and any disclosed equivalent-component policy. A change of supplier alone is not necessarily a change of product where the accepted specifications remain satisfied.
We may substitute hardware of similar or better quality if the substitute preserves the promised fit, function, compatibility, load rating, installation requirements, and warranty protection. A specifically guaranteed brand or other material feature will not be changed without your approval. We will identify a substitution in the order or shipping record. We will not materially change the selected species, finish, core construction, dimensions, represented features, or price without your approval. If a proposed substitute changes instructions or warranty coverage, we will disclose that before seeking your approval.
A backorder or substitution does not override applicable delay notices, cancellation rights, or refund obligations. Specific historic substitution examples, brand origins, and unavailable slide sizes are not permanent promises for BarkerCustom unless verified for the actual order.
12 Shipping, delivery and special access
The final order identifies the delivery address, service level, shipping charge, and any special-service quote. We select an appropriate carrier and shipping method unless a different method is expressly included. Free-shipping promotions cover only the stated eligible service and destinations, not every additional delivery service.
Standard residential freight service is curbside at an accessible delivery point. It does not include carrying products inside, into a garage, upstairs, through a building, or to the installation room. Your shipping quote states whether liftgate unloading is included; oversized or otherwise ineligible items may require a separately disclosed service or pickup arrangement. You are responsible for providing accurate contact/access information and arranging capable assistance, equipment, and protected storage after delivery.
Tell us before ordering about truck restrictions, narrow/steep roads, gates, ferries, islands, remote sites, high-rise buildings, receiving-hour restrictions, and items too large for ordinary liftgate service. Delivery may require a different agreed destination, terminal pickup, specialized equipment, or an additional service. We will disclose known required charges before acceptance and seek agreement for material changes. Costs caused by inaccurate access information, an unjustified missed appointment, or an unauthorized requested service may be charged to you where previously disclosed and lawful. No unspecified penalty is created by this paragraph.
Checkout accepts delivery addresses in the contiguous United States. Contact us before ordering if you need delivery to Alaska, Hawaii or another country; any such arrangement must be agreed in writing, and you arrange and pay for any onward transportation, customs, import duties, brokerage and destination handling beyond the agreed delivery point. Replacement delivery ordinarily uses the same agreed delivery point. Any allocation of additional costs for our defective or incorrectly supplied goods remains subject to the Limited Warranty and applicable law.
Unless expressly offered in the accepted order, factory pickup is unavailable. Customer requests to hold or consolidate shipments require our written acceptance and may change timing. We will identify any approved storage or handling charges in advance.
13 Receipt, inspection and shipping damage
At delivery, compare the package or pallet count with the receipt, inspect for visible damage when reasonably possible, photograph concerns, and note exceptions on the delivery record. Keep packaging and affected parts until we give reasonable claim instructions. Promptly protect received goods from weather and unsuitable conditions. Dispose of ordinary packaging at your expense after any necessary inspection, subject to required remedies and our written instructions.
Contact us promptly about damaged packaging, missing packages, or unusable goods. Follow safe carrier procedures. Do not accept an unsafe unloading arrangement. Where practical, contact us before refusing damaged freight so we can coordinate the claim; this request does not waive a lawful rejection right. Signing a delivery receipt without noting concealed damage does not itself waive a covered concealed-defect claim.
For shipments we arrange, we handle loss or damage arising before delivery to the agreed delivery point. After that delivery, you are responsible for loss or damage caused by your storage, handling, installation, or independently arranged onward carrier, without eliminating remedies for defects or damage that already existed. Title and risk allocation must remain consistent with the actual shipping agreement and mandatory law.
An unjustified refusal, failure to receive, or voluntary return does not automatically cancel a custom order. Subject to the accepted disclosures and applicable law, you are responsible for reasonable actual return, storage, and redelivery charges caused by that conduct. Those charges do not penalize a lawful refusal, a covered defect, or our failure to perform. We will communicate the disposition and cost before reshipment; no automatic forfeiture of all funds or ownership is created here.
14 Shortages, errors and claims
Inspect and inventory all shipments promptly before assembly, field finishing, or installation. A partial shipment may have separately listed outstanding components. Submit a claim by email to info@barkercustom.com with your order number or other reasonable proof of purchase, affected item/part numbers, a description, photographs, and relevant measurements. Report visible shipping damage, wrong goods, and shortages as soon as reasonably possible; our administrative target is within 14 days after delivery. That target helps preserve carrier evidence and is not an automatic forfeiture deadline. No late-report fee applies to an otherwise covered claim. Late notice may affect a claim only to the extent allowed by applicable law, including where delay prevents reasonable verification or causes avoidable additional damage. Report latent defects promptly after discovery. Coverage depends on the applicable warranty and legal rights; this administrative reporting target does not shorten either.
Do not install or modify an obviously defective part, discard evidence, or incur repair/expedited-shipping charges expecting reimbursement without contacting us first, except where immediate reasonable action is needed to prevent harm or applicable law provides otherwise. A modification does not void unrelated coverage; damage caused by that modification may be excluded.
We retain the right to inspect the affected products, request reasonable substantiation, approve or deny claims under the stated coverage and exclusions, and choose the covered repair, remake, or replacement remedy. The detailed grounds and review process appear in Limited Warranty section W8. We will explain the factual and policy basis of a denial. To request a second review, reply to the claim correspondence and request supervisory review. Our decision is not a final or binding determination of your legal rights.
For a covered issue, we may repair the affected part, provide replacement parts, or replace the affected product as permitted by the Limited Warranty and law. Replacement of a damaged slide or component does not ordinarily require replacement of an entire assembled drawer box or rollout. We generally use standard shipping for approved replacements unless otherwise agreed or legally required. We will communicate an estimated schedule rather than promise an unverified turnaround.
15 Limited warranty and remedies
The BarkerCustom Limited Warranty supplied with your order describes the approved coverage, beneficiaries, periods, exclusions, claim process, and service costs. The complete warranty is available before purchase and can be saved or printed. A free printed copy is available on request by email to info@barkercustom.com or by mail to Barker Cabinets Inc., 19355 SW 125th Ct, Tualatin, OR 97062. It is also included or linked by its preserved version in your order confirmation.
For a covered manufacturing defect, the Limited Warranty ordinarily provides repair or replacement of the affected supplied part or material. It does not promise a complete kitchen replacement, a different configuration, an upgrade, or exact matching to an aged installation. Labor, removal, reinstallation, countertop, appliance, plumbing, and other project costs are covered only if expressly included or legally required.
These contractual remedies do not eliminate mandatory rights if a limited remedy fails its essential purpose, the seller does not provide the legally required remedy, or another nonwaivable right applies. No broad website “as is” statement disclaims the express product warranty or implied warranties that cannot lawfully be disclaimed.
16 Liability limits and rights preserved
To the extent permitted by applicable law, we are not liable for indirect, special, incidental, or consequential losses, including lost profits, loss of use, contractor standby costs, project delay costs, or the cost of removing and reinstalling unrelated products. To the extent permitted by applicable law, our aggregate liability arising from an affected product or order is limited to the amount you paid us for the affected product giving rise to the claim.
This monetary-liability cap does not reduce our express obligations to provide covered repairs, replacement parts, and claim shipping under the Limited Warranty. For a repaired or replaced product, the reference purchase amount is the amount paid for the originally purchased product.
These limits do not apply to fraud, gross negligence, willful or reckless misconduct, personal injury or other liability that applicable law prohibits limiting, or any nonwaivable statutory remedy. They do not excuse delivery of the agreed goods or required refunds. No provision requires you to waive lawful payment-dispute rights, government complaints, or honest reviews.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Where the law requires a different remedy or prohibits a limitation, that law controls.
17 Disputes and governing law
These Terms are governed by Oregon law, except to the extent applicable law requires otherwise. Subject to any nonwaivable consumer right to another forum and any permitted small-claims proceeding, disputes arising from this sale will be brought in the state or federal courts located within the State of Oregon that otherwise have jurisdiction and proper venue. The parties consent to those courts’ jurisdiction for such disputes.
This provision does not deprive a consumer of substantive protections or remedies that applicable law does not permit the parties to waive. We encourage you to contact customer service to resolve a concern, but doing so is not an exclusive remedy, a restriction on contacting an agency, or a waiver of a filing deadline imposed by law. These Terms impose no arbitration requirement, class-action waiver, jury-trial waiver, or shortened limitations period.
18 Electronic records and general provisions
You agree to receive routine order confirmations, shipment updates, revisions, and claim communications electronically at the contact address you provide, subject to any additional consent required by law for a particular disclosure. Keep that address current. Electronic order communications do not constitute consent to unrelated marketing.
We retain a record of the accepted terms and specifications for your order. You may request a copy by email to info@barkercustom.com. A later update to the website does not amend an accepted order without a valid agreement. If one provision is unenforceable, the remaining provisions continue only to the extent consistent with applicable law; severability does not authorize us to invent a materially different bargain.
Failure to enforce a provision on one occasion does not waive it on another. These Terms do not create an agency or partnership. Any permitted assignment remains subject to applicable law and does not remove obligations owed to you. We may suspend website access for fraud, security abuse, or unlawful activity, but suspension does not erase existing order, warranty, or refund obligations.
Website content belongs to its lawful owner. You may save relevant product instructions, terms, and order records for your purchase and installation. Do not misappropriate content, misuse accounts, or interfere with the website. Honest reviews and lawful complaints are permitted. Project uploads and public content permissions, if offered, are addressed in Part 3 and the privacy notice; this sale contract does not transfer ownership of your private project, photos, or review to us.
Part 2 · BarkerCustom limited warranty
Version BC-2026-11-10 · Last updated November 10, 2026. Warrantor: Barker Cabinets Inc., doing business as BarkerCustom, 19355 SW 125th Ct, Tualatin, OR 97062. Written claims: info@barkercustom.com. A free printed copy of this warranty is available by email or by mail at the address above.
W1 Who and what is covered
Subject to the terms below, BarkerCustom warrants its manufactured products against defects in materials and workmanship under normal intended use for the following periods:
- Cabinet cases, doors, drawer fronts, finished panels, moldings, and other manufactured cabinetry components: five years from the original purchase date. The same five-year coverage applies whether doors or fronts are purchased with cabinets or separately. A drawer front is a cabinetry front, not a drawer box.
- Drawer boxes and the manufactured box portions of rollouts: from the original purchase date for as long as the original consumer purchaser owns the home where those products were first installed. This ownership-based coverage concerns the manufactured box and does not convert its slides or other purchased hardware into BarkerCustom-manufactured components.
- Factory-applied finishes: covered against qualifying manufacturing defects for the period applicable to the underlying manufactured product, subject to the cosmetic standards and exclusions below. Normal wear, natural material variation, aging, and excluded environmental effects are not finish-manufacturing defects.
- Hinges, drawer slides/guides, and other third-party hardware: any separate manufacturer warranty applies according to that manufacturer's complete terms supplied for the selected hardware before purchase. Manufacturer coverage is not a blanket BarkerCustom lifetime warranty. We will assist with the manufacturer claim route, and any independent seller obligations under applicable law remain in effect. Do not infer coverage for ordinary wear or a particular duration from a general reference to a manufacturer warranty.
This Limited Warranty is for the original consumer purchaser and is not transferable to a subsequent purchaser or homeowner. It applies to products used in single-family, non-rental, non-commercial residences. No voluntary coverage for rental, commercial, outdoor, or other uses is included unless expressly supplied in a separate written warranty. Rights that applicable law provides despite these voluntary coverage limits remain available.
A replacement or repair continues the unexpired original warranty rather than starting a new five-year or ownership period, except where applicable law requires an extension or different coverage. Warranty service does not change the identity of the original purchaser or installation home.
W2 Our repair, remake and replacement remedy
For a covered defect, we will, at our election, repair, remake, or replace the defective supplied part or component without charge for the covered part or material. We select a reasonable effective remedy consistent with this warranty and applicable law. The remedy may be an individual panel, door, drawer component, or hardware item; it need not be an entire cabinet, assembled drawer box, rollout, room, or project. We do not replace undamaged adjoining pieces solely to obtain a preferred color or grain relationship.
Warranty remakes are limited to the original ordered specifications. They are not an opportunity to select a different size, layout, material, finish, or upgrade, or to correct the purchaser's measuring, ordering, drilling, assembly, or installation mistake. Approved remakes have no elective cash, credit, or refund value. This does not eliminate a refund or other remedy required by law, including where an exclusive repair or replacement remedy fails its essential purpose.
If the original item has been discontinued or changed, we may use the same style if available or a reasonably comparable currently offered part. We do not guarantee an exact match to an aged finish, earlier order, sample, discontinued feature, or adjoining material. A materially different substitute will be addressed consistently with your rights rather than imposed as an arbitrary substitute.
We will communicate an estimated service or production schedule after reviewing the claim. Standard shipping, rather than expedited shipping, is used for approved remakes unless we agree otherwise or the law requires otherwise. Coverage is not a promise to meet an installation or contractor deadline. We remain responsible for providing required remedies within the time and manner the law requires.
W3 Cosmetic surface grades and exact thresholds
This is a strict cosmetic-appearance standard for the surfaces and materials described below. A cosmetic claim must exceed its applicable size threshold, concern a covered defect rather than an excluded characteristic, and otherwise satisfy the warranty. A threshold exceedance triggers covered treatment only when those other requirements are met; it is not automatic approval of every mark.
For measurement, use an accurate rule and photograph the affected area with the scale visible. A defect is larger than the stated threshold only if its length or diameter exceeds that number; a defect exactly equal to the threshold does not qualify for a cosmetic remake. Measure the actual length or diameter of the affected area. We assess clustered or widespread conditions against the accepted specifications and applicable law; separate distances are not simply added to manufacture a measurement. We assess all reasonable evidence of the actual condition; no undisclosed special viewing-distance test applies.
For wood and wood-veneer products, a potentially qualifying cosmetic defect can include damage, a blemish, scratch, missing finish, pit, hole, rub mark, discoloration, sheen irregularity, gouge, lump, paint chip, raised area, or indentation. Ordinary disclosed natural characteristics and the specific manufacturing features in W4 are excluded even when larger than the size threshold.
The surface hierarchy is as follows:
- Grade A, door and drawer-front faces: a covered cosmetic defect must be larger than 1/8 inch in length or diameter. This is the most demanding cosmetic threshold.
- Grade B, door and drawer-front edges: top, bottom, left, and right edges. A covered cosmetic defect must be larger than 1/4 inch in length or diameter. Normal end-grain roughness and pitting are excluded.
- Grade C, door and drawer-front backs and exposed drawer-box surfaces: a covered cosmetic defect must be larger than 1/2 inch in length or diameter. This includes exposed sides of drawer boxes, but excludes their concealed rear and underside/bottom surfaces. Identifying etching and permitted veneer plugs or patches are excluded.
- Visible cabinet-case surfaces: a covered cosmetic defect must be larger than 1 inch in length or diameter on a surface intended to remain visible after the specified installation. This includes the ordinary visible case interior, subject to the natural maple-veneer and finish characteristics below. Cabinet interiors do not receive the door-face Grade A standard merely because a door opens or because the cabinet has an exposed interior.
- Grade D, concealed surfaces: no cosmetic defect of any size qualifies for a cosmetic remake on a surface intended to remain concealed, including cabinet backs facing the wall, concealed case exteriors, drawer-box undersides, and concealed drawer-box rear surfaces. Concealed appearance alone is not a covered loss.
The classification follows the product's stated construction and intended installation. An exposed decorative end panel or other finished panel is assessed according to the corresponding face, edge, and back grade; its cosmetic face does not become a hidden case surface. Moldings and trim use the corresponding visible decorative face, edge, or concealed-back classification. These panel/trim classifications clarify application of the same existing thresholds rather than introduce new measurements. The separate visible-case standard continues to govern the case itself.
These size and visibility rules govern cosmetic-only claims. They do not excuse a structurally defective part, an unsafe condition, a product that cannot perform its promised function, the wrong ordered material or size outside its applicable tolerance, or a remedy required by law. For example, hidden structural delamination is not automatically excluded merely because the damaged area is concealed.
W4 Natural material and finish exclusions
The following disclosed characteristics are not cosmetic defects and do not qualify for a preference return, repainting of a project, or cosmetic remake:
- Natural variation in grain, grain pattern, figure, mineral streaking, color tone, pores, and knots consistent with the ordered material and grade. Solid wood, veneer, center panels, moldings, and edge banding can differ within the same product or order.
- Any absence of door-to-door grain matching, including slab plywood doors, adjacent fronts, fronts on the same cabinet, panels, moldings, and replacements. We do not offer sequence matching, bookmatching across doors, or continuous-grain layouts. A selected grain direction describes orientation only. No paid matching option or exception is offered.
- Normal color and sheen differences between small finish batches, samples, separate orders, older products, replacements, painted or stained wood, and PVC or other disclosed edge banding. We do not offer custom color matching. New material may age differently and is not guaranteed ever to match existing material exactly.
- Natural changes caused by age, air, light, and normal wood movement. Cherry, walnut, sapele, and other photosensitive woods may change noticeably. Differences between an older veneered panel and a newly milled frame are expected; future color convergence is not promised.
- Ordinary mineral streaks, knots, discoloration, pitting, streaking, minor scratches beneath the finish, and finish buildup in natural maple-veneer cabinet-case material. The case material's appearance standard differs from a decorative door-face finish.
- Normal end-grain roughness and pitting, including on the top and bottom of a wood door or front. End grain absorbs finish differently from the face. Ordinary end-grain texture is excluded regardless of the cosmetic size threshold.
- Normal seams, slight joint lines or finish openings at solid-wood frame joints, and finish bridging between a frame and center panel. Five-piece doors are not represented as permanently seamless or caulked at the frame-panel transition. This exclusion does not cover actual structural joint failure.
- Normal glue-up transitions in raised-panel centers made from multiple lumber strips; a center panel is not promised to be one continuous wide plank. Normal back-side structural pin-nail marks, identifying job/cabinet/finish-code engravings, and spray-hanger holes on the top, bottom, side edges, or back are also excluded. Hanger holes are not normally touched up.
- Normal slab-plywood face grain and banded-edge seams, including seams or small material features that remain visible through paint or stain. Slab plywood has real-wood veneer over plywood and is not represented as a seamless or grainless painted surface. Normal seam appearance is excluded; failed adhesion, structural delamination, and other covered functional defects are assessed separately.
- Veneer plugs and patches visible through a drawer-box finish when they are ordinary features of the selected material. They are not cosmetic defects merely because their outline is visible.
- Ordinary preparation conditions on raw and primer-only goods. The purchaser supplies final sanding, filling, smoothing, and compatible finish coats. Primer-only gouges, dents, dings, grain marks, scratches, and primer buildup that are ordinary preparation matters do not qualify for a finished-surface cosmetic remake. Primer is not a completed finish. Structural and other covered manufacturing defects remain subject to this warranty.
Damage caused by smoke, cooking residue, inappropriate cleaners, standing water, steam, excess heat, or unsuitable humidity is addressed under the causation-based exclusions in W7. The exclusions above do not permit supplying a different ordered species, material, finish selection, or grade.
W5 Laminate, acrylic and other non-wood fronts
For laminate and acrylic doors and drawer fronts, the following material-specific cosmetic rules apply rather than treating wood-grain characteristics as laminate defects:
- Grade A faces: a cosmetic damage claim must expose the core material, such as MDF or particleboard, and the exposed-core damaged area must be larger than 1/8 inch in length or diameter.
- Grade B top, bottom, and side edges: a cosmetic damage claim must expose the core material and the exposed-core damaged area must be larger than 1/4 inch in length or diameter.
- Grade C backs: a covered cosmetic defect must be larger than 1/2 inch in length or diameter. The back may be a different disclosed balancing material or sheen from the face, such as a melamine back behind a gloss face.
- Grade D concealed surfaces: no cosmetic remake is supplied solely for concealed appearance.
Normal slight spider-web marks, light scratches or marring in a surface layer, small surface indentations, visible banding seams, seam-color variation, and ordinary seam-adjacent cosmetic irregularities that do not satisfy the applicable covered-defect test are excluded. This is not permission for unsafe sharp edges, failed edge adhesion, functional damage, structural delamination, or delivery of the wrong selected material. Those issues are evaluated separately from cosmetic core exposure.
Keep factory protective film in place during installation where the product instructions require it; follow the instructions for its removal and cleaning. Installation scratching caused by premature film removal or improper handling is excluded. Normal pattern repetition and disclosed differences between the face, back, and banding are not a grain-matching promise. Drawer boxes and wood cabinet cases retain their own material and surface standards above.
W6 Size, warping and minor on-site adjustment
Doors, finished panels, and other cabinet parts over 24 inches wide or over 80 inches tall are excluded from this voluntary warranty for warping or bowing. Door warp of 1/4 inch or less is within the disclosed acceptable limit and does not qualify for a warp remake. Drawer fronts over 42 inches wide are excluded from this voluntary Limited Warranty. These oversized-product limitations must be displayed for the selected item before purchase. They do not waive required delivery-damage, nonconformity, or other nonwaivable remedies.
Assess suspected warp with the affected part free from installation forces and using a reliable straightedge or flat reference appropriate to the product. Provide photographs showing the measured gap and method. We may request removal of an external distortion source, reasonable acclimation to the intended controlled interior, or an inspection to distinguish actual product warp from an uneven opening or installation problem. No fixed additional waiting period is imposed by this warranty, and this process may not be used to unreasonably delay a required remedy.
Cabinet-case machining and alignment may vary by plus or minus 1/8 inch, and some CNC-drilled case holes may vary in placement by up to 1/4 inch. The finished dimensions and permitted manufacturing tolerances for doors, drawer fronts, and other components are those expressly stated in the accepted product specification. A wrong ordered size, unsafe fit, or functional manufacturing failure is not excused by referring to an unrelated tolerance.
Minor assembly adjustments can be part of an RTA installation. We may recommend loosening and retightening assembly screws, alignment adjustment, careful use of a mallet as instructed, or recentering a shifted panel. We may decline a full-part remake when a reasonable safe adjustment will provide the conforming result promised by this warranty. We will provide appropriate instructions and evaluate whether the proposed adjustment is actually adequate. You are not required to undertake unsafe work, accept a material reduction in appearance or function, or perform substantial fabrication to correct our covered defect. If a suggested adjustment does not reasonably correct it, contact us for further review. This does not turn paid customer labor into a generally covered service.
W7 Excluded causes and uses
This Limited Warranty does not cover normal wear and tear, accidental damage after delivery, or damage actually caused by misuse, abuse, neglect, unsuitable storage, improper handling or installation, unauthorized alteration, transportation arranged independently after the agreed delivery point, fire, flooding, other casualty, prolonged moisture, extreme heat or cold, unsuitable humidity, or failure to follow reasonable care instructions. Products are intended for controlled interior use. Promptly wipe moisture from surfaces and protect them from environmental extremes.
A third-party installer, repairer, maintenance product, or replacement part does not by itself void unrelated coverage. The claimed exclusion must be connected to the condition being denied. Customer measurement, selection, finishing, drilling, or installation errors do not become a manufacturing defect simply because a different part would solve the resulting project problem. Defects or shipping damage for which we are responsible remain subject to the stated remedies and applicable law.
W8 Evidence, inspection, approval and denial
Submit a written claim by email to info@barkercustom.com. Include your dated order confirmation or other reasonable proof of purchase; purchaser and order identification; affected product and part numbers; the issue and discovery date; clear overall and close-up photographs; and measurements relevant to the claim. We may verify original-purchaser and home-ownership eligibility where relevant. If you cannot supply a requested item, tell us why so we can consider reasonable alternative evidence.
For a size claim, photograph both measurement endpoints using an accurate rule. If using a tape measure, start at the one-inch mark and subtract one inch, rather than relying on a bent or worn end hook. Unsupported or unreliable measurements are not sufficient to establish a size defect. We may require additional photographs, a reliable measurement, inspection, or an authorized return when reasonably necessary to assess the issue.
We reserve the right to approve or deny a claim based on this warranty, the accepted product specifications, the evidence, and applicable law. Grounds for denial include:
- The claimant, product, use, or time period is outside the stated voluntary coverage.
- The evidence does not establish a covered defect after a reasonable opportunity to provide relevant information or permit an appropriate inspection.
- A cosmetic issue is at or below the applicable threshold, on a concealed Grade D surface, or is an expressly excluded natural, material, finish, or manufacturing characteristic.
- The condition results from an excluded cause, customer error, or unauthorized modification that caused the issue.
- The request seeks grain or color matching, an upgrade, changed dimensions, replacement of unaffected products, or another benefit this warranty does not provide.
- A conforming effective repair or replacement has already resolved the claimed issue and no further covered defect is established.
We may decline a claim supported by materially false or fabricated evidence; this does not cancel unrelated valid rights. A mere preference for a new part, an unsupported assertion, or the size of a mark without the applicable coverage requirements does not establish entitlement to a remake. Conversely, our reservation of review authority does not allow denial of a valid covered claim for an unrelated or arbitrary reason.
Preserve affected parts and packaging when reasonably possible. Do not discard, materially alter, install an obviously defective part, or arrange chargeable repairs expecting reimbursement before contacting us, except where reasonable urgent safety measures or applicable law require otherwise. We will explain reasonable inspection/return arrangements, service costs, and the proposed remedy. We will not make a claim impossible by insisting on unavailable evidence when reasonable alternatives establish it.
If we deny all or part of a claim, we will identify the relevant facts and warranty provision. You may reply with further evidence and request supervisory review. Our determination is not final or binding on your legal rights; it does not prevent a lawful court claim, payment dispute, agency complaint, or other available remedy. A general reservation of rights cannot override a specific coverage promise.
W9 Claim freight, labor and liability limits
For a covered BarkerCustom claim, we pay standard outbound shipping for the approved replacement to the original agreed delivery point. If we require return of a product for a covered claim, we provide or reimburse reasonable authorized standard return transportation as legally required. We will explain the inspection arrangements in advance. Where applicable law treats written notice of an installed or unreasonably bulky product as a return or requires on-site service or pickup, we will follow that process.
You bear charges for customer-error products, optional upgrades, independently requested expedited service, or noncovered work only when we disclose the charge and you authorize it before incurring it. No blanket inspection fee, late-report charge, disposal fee, or return-freight obligation is imposed on an otherwise covered claim where the law assigns that cost to us. If inspection determines a claim is not covered, any proposed chargeable next step must be explained and accepted before we proceed.
This parts-and-materials warranty excludes labor for field finishing, removal, assembly, installation, and reinstallation, and removal or reinstallation of countertops, appliances, plumbing fixtures, and related materials, except where we expressly agree otherwise or applicable law requires that cost to be covered. We do not reimburse unauthorized third-party charges merely because a claim was submitted.
TO THE EXTENT PERMITTED BY APPLICABLE LAW, WE ARE NOT LIABLE FOR INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL LOSSES, INCLUDING LOST PROFITS, LOSS OF USE, CONTRACTOR STANDBY COSTS, PROJECT DELAY COSTS, OR REMOVAL AND REINSTALLATION OF UNRELATED PRODUCTS. TO THE EXTENT PERMITTED BY APPLICABLE LAW, OUR AGGREGATE LIABILITY ARISING FROM AN AFFECTED PRODUCT IS LIMITED TO THE AMOUNT YOU PAID US FOR THAT PRODUCT.
This monetary-liability cap does not reduce our express obligations to provide covered repairs, replacement parts, and claim shipping under the Limited Warranty. For a repaired or replaced product, the reference purchase amount is the amount paid for the originally purchased product.
These limits do not apply to fraud, gross negligence, willful or reckless misconduct, personal injury or other liability that applicable law prohibits limiting, or a nonwaivable statutory remedy. They do not excuse delivery of the agreed goods, required refunds, or legally required relief when a limited remedy fails its essential purpose. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.
W10 Goodwill and rights that remain available
We may, at our discretion, offer an accommodation beyond this warranty when no coverage or other legal remedy is owed. We may decline such a discretionary request, including a request for a no-charge customer-error replacement or a benefit outside the stated coverage, subject to applicable law. A one-time goodwill accommodation does not create a general return policy, extend every warranty, or waive the published standards for later claims. We remain bound by any specific accommodation we actually agree to provide.
Goodwill discretion is separate from our obligation to honor valid warranty claims and other mandatory rights. We do not require a favorable review, withdrawal of criticism, or waiver of nonwaivable rights to provide warranty service.
This written Limited Warranty does not disclaim implied warranties that applicable law preserves, and it imposes no contractual limit on their duration. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Where applicable law requires a remedy, service cost, or coverage beyond this written warranty, that law controls.
Part 3 · Website, accounts and PRO membership
S1 Accounts and sign-in
You sign in with a one-time code sent to your email address. Keep access to that email account secure: anyone who can read it can sign in as you. Tell us at info@barkercustom.com if you think someone else has used your account. Never send passwords, payment card details or sign-in codes by email.
S2 Your designs and shared links
The rooms, designs and project details you create remain yours. We store them so that you can keep working on them, order from them and get help with them. When you share a room or design link, anyone with the link can view what you shared, so share links only with people you trust.
S3 Designer previews, prices and measurements
The designer, 3D views, presentation drawings and renderings are illustrations to help you plan. Colors, grain, sheen, lighting and scale on a screen differ from the real products, and knobs, pulls, appliances, sinks and faucets shown in a preview are not supplied unless they appear as items in your order. We do not verify your measurements or your design; the measurement and design responsibilities in section 3 apply. Prices shown while you design are estimates until you confirm the order total at checkout.
S4 PRO membership
Early Pro is a monthly design membership at $39.95 per month, billed in advance through Stripe by CabinetDesigner.ai. One membership works on both CabinetDesigner.ai and BarkerCustom. It renews automatically each month until you cancel, and there is no free trial. The included features and allowances are shown before you subscribe.
You can cancel at any time from your account. Cancellation takes effect at the end of the billing period you have already paid for, and you keep PRO access until then. We do not refund partial months except where the law requires. If we change the membership price, we will tell you before it applies, and the new price applies only from a billing period that starts after that notice.
A membership is separate from cabinet purchases. It does not include products, product discounts, manufacturing output or staff access, and cabinet orders remain governed by Parts 1 and 2.
S5 Acceptable use
Use the website and designer only for planning and buying cabinetry and related products. Do not misuse accounts, interfere with the website, attempt to access other people's projects or our systems, or copy the website's content, product data or software for another service. We may suspend access for fraud, security abuse or unlawful activity; suspension does not erase existing order, warranty or refund obligations.
S6 Changes to these terms
We may update these terms. The version and date at the top show the current version. The version you accepted with an order continues to govern that order, and a change to the membership terms applies from a billing period that starts after we give notice. How we handle website statistics is described in the privacy notice.